Cette page a été traduite avec Google Traduction

Bibliothèque de spécifications d'équipement

Informations de base sur le modèle

  • Fabricant:
    Vermeer
  • Modèle:
    SC30TX

Voir les fabricants Voir les modèles

Information additionnelle

KEY FEATURES

LONGEST TRACKS IN ITS CLASS: Provides consistent stability with easier loading and unloading of the machine compared to shorter tracked models. The longer tracks offer best-in-class low ground pressure, which helps reduce the possibility of turf damage.

SMOOTH OPERATION: The exclusive SmartSweep control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.

PATENTED YELLOW JACKET CUTTER SYSTEM: The Vermeer-exclusive Yellow Jacket cutter system is designed to provide faster, easier serviceability, as well as extended pocket and tooth life.

25 HP (18.6 KW) EFI ENGINE: Starts well during cold weather, makes choke cables obsolete and offers improved fuel economy over comparable carbureted gas engines.

OPERATOR PRESENCE SYSTEM: Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.

HYDRAULICALLY DRIVEN CUTTER WHEEL AND GROUND DRIVE: The elimination of belts or chain drives reduces service and maintenance.

GENERAL
-Length: 94" (238.8 cm)
-Width: 35" (88.9 cm)
-Height: 49" (124.5 cm)
-Weight: 1550 lb (703.1 kg)

ENGINE
-Make and model: Kohler ECH740 EFI
-Number of cylinders: 2
-Max gross horsepower: 25 hp (18.6 kW)
-Max torque: 42 ft-lb (56.9 Nm)
-Fuel tank capacity: 6.8 gal (25.7 L)
-Fuel type: Gas
-Air cleaner: 6" (15.2 cm) 2-stage dry
-Oil flter: Spin-on
-Oil volume with filter: 2 qt (1.9 L)
-Cooling medium: Air/Oil

CUTTER WHEEL DRIVETRAIN
-Cutter wheel diameter without teeth: 16" (40.6 cm)
-Cutter wheel thickness: .5" (1.3 cm)
-Cutter wheel straight-line dimension: 35.5" (90.2 cm)
-Cutter wheel cut above ground: 25" (63.5 cm)
-Cutter wheel cut below ground: 12" (30.5 cm)
-Tooth description: Yellow Jacket™ cutter system
-Number of teeth: 16
-Number of indexes: 2
-Number of pockets: 16
-Reversible pockets: Yes
-Cutter wheel guard: Yes
-Chip containment: 2.2 cu ft (.1 m3)

HYDRAULIC SYSTEM
-Tank capacity: 9 gal (34.1 L)
-Recommended oil type: ISO 68
-Filtration method: In-line return filter
-Pump flow at max rpm: 16 gpm (60.6 L/min)
-System relief pressure: 2750 psi (189.6 bar)
-Flow control: SmartSweep control system
-Directional control: Standard
-Oil cooler: Fan-cooled

ELECTRICAL SYSTEM
-System voltage: 12 V
-Battery: 405
-Standard gauge: Hour meter/tach
-Switches: Cutter wheel drive
-Controller: Yes

TRACK DRIVE SYSTEM
-Track type: Rubber 7" (17.8 cm) width
-Track length on ground: 31.4" (79.8 cm)
-Type of idler: Cast
-Number of idlers: 5
-Track drive pump type: Hydrostatic
-System relief pressure: 2900 psi (199.9 bar)
-Pump flow at max rpm: 11.4 gpm (43.2 L/min)
-High-speed travel: 3.2 mph (5.1 km/h)
-Ground-bearing pressure - soft ground: 3.4 psi (23.4 kPa)

Cette information est fournie à des fins d'information seulement. HDD Broker LLC ne peut garantir l'exactitude ou l'exhaustivité de ces informations. Cette information est sujette à changement par le fabricant. Certaines spécifications peuvent varier selon l'année du modèle.

HDD Broker utilise des cookies et collecte des informations personnelles sur ses sites web.

Pour en savoir plus, consultez les règles de confidentialité et de cookie de HDD Broker. En cliquant sur "J'accepte", vous indiquez que vous avez réglé les paramètres de votre navigateur en fonction de vos préférences et que vous acceptez l'utilisation des cookies par HDD Broker.

x