Fermer

• Fabricant:
  Ditch Witch
• Modèle:
  JT9
• Taille de plate-forme:
  0 - 10,000 lbs Pullback

DIMENSIONS
Height: 74 in (1.9 m)
Length: 146 in (3.7 m)
Width: 49 in (1.24 m)
Operating Weight (with 50 pipe): 7.380 lb (3350 kg)
Entry Angle: 10-14°
Angle of Approach: 18°
Angle of Departure: 18°

OPERATION
Maximum Spindle Speed: 186 rpm
Maximum Spindle Torque: 1,100 ft·lb (1490 N·m)
Thrust Force: 9,000 lb (40 kN)
Pullback Force: 9,000 lb (40 kN)
Thrust Travel Speed: 188 fpm (57 m/min)
Pullback Travel Speed: 188 fpm (57 m/min)
Minimum Bore Diameter: 3 in (76 mm)
Ground Travel Speed:
Forward 2.4 mph (3.9 km/hr)
Reverse 1.5 mph (2.4 km/hr)

POWER (TIER 4)
Engine: Deutz TD2.9
Fuel: Diesel
Cooling Medium: Liquid
Injection: Direct
Aspiration: Turbocharged
Number of cylinders: 4
Displacement: 177 in3 (2.9 L)
Bore: 3.2 in (92 mm)
Stroke: 4.33 in (110 mm)
Manufacturer's Gross Power Rating: 66 hp (49 kW)
Rated Speed: 2,200 rpm
Emissions Compliance: EPA Tier 4 (EU Stage IIIB)

POWER (TIER 4i) (LRC)
Engine Deutz: D2011L04i
Fuel: Diesel
Cooling Medium: Integrated oil
Injection: Direct
Aspiration: Natural
Number of Cylinders: 4
Displacement: 189 in3 (3.1 L)
Bore: 3.7 in (94 mm)
Stroke: 4.4 in (112 mm)
Manufacturer's Gross Power Rating: 66 hp (49 kW)
Rated Speed: 2,300 rpm
Emissions Compliance: EPA Tier 4i (EU Stage IIIA)

DRILLING FLUID SYSTEM (ON BOARD)
Maximum Pressure: 750 psi (52 bar)
Maximum Flow: 16 gpm (60.57 l/min)
Fluid Tank Capacity 40 gal (151 L)

FLUID CAPACITIES
Hydraulic Reservoir: 23 gal (87 L)
Fuel Tank 18 gal (68 L)

POWER PIPE HD
Length of Drill Pipe, nominal: 72 in (1.8 m)
Diameter of Drill Pipe, tool joint end: 2 in (51 mm)
Diameter of Drill Pipe: 1.58 in (40 mm)
Minimum Bend Radius: 82 ft (25 m)
Weight of Drill Pipe, lined: 29 lb (13 kg)

BATTERY (TIER 4)
SAE reserve capacity rating: 195 min
SAE cold crank rating @ 0°F (-18°C): 950 amps

BATTERY (TIER 4i)
SAE reserve capacity rating: 165 min
SAE cold crank rating @ 0°F (-18°C): 875 amps